Ran through the calibration and all seemed right at 3400.
Aqua rite t cell 15 reset.
Read out on aqua rite was 2200.
I just added a 40 lb bag of salt.
As a precaution the cell can be installed vertically or in an inverted manner from the manufacturer.
We often get calls from people having a problem where their hayward aqua rite salt chlorinator system is reading a different salt level than manual testing.
If the check salt light is lit on a hayward aqua rite salt chlorinator it could mean a number of things.
Factory default is 2800ppm.
It is designed to deliver everything the original t cell 15 already does but with an additional 25 lifespan.
I thought of cleaning the cell because it says on the cell theres a sticker inspect and clean every 3 months.
Water tests at 3500 ppm salt.
The check salt and inspect cell lights are flashing.
Replacement turbo salt cell for the goldline aqua rite salt chlorinator from hayward hayward replacement part number t cell 15.
While both the t cell 15 and the t cell 15ll can support pools up to 40 000 gallons in size the regular t cell 15 is designed to produce around 580lbs of chlorine throughout its life before it needs to be replaced.
T 15 is the factory default if the incorrect cell is chosen the salt level amperage and voltage will not be correct and the system will turn the chlorinator off.
Waiting to see if that helps.
Push 8 cell size the aqua rite scg uses one of 4 cell sizes t 15 t 9 t 5 or t 3.
Slide the main switch to the auto position.
I havent removed the cell yet.
How to set turbo cell type before operation the aqua rite must be configured for the chlorinator cell that will be used.
T 15 is the factory default.
The cell size displayed here has to match the installed cell to ensure proper operation including salt calculation.
The cell install in this system is t 3.
Page 4 before operation the aqua rite must be configured for the chlorinator cell that will be used.
The first thing to do is to remove the cell and check the blades inside for buildup.
Here is how to recalibrate a hayward aqua rite turbo cell in three simple steps.
6 40 t cell 9.
If the incorrect cell is chosen the salt level amperage and voltage will not be correct and the system will turn the chlorinator off.
This is a 15000 gallon pool.
Often times pool owners can solve this by recalibrating the salt cell.
How to set turbo cell type before operation the aqua rite must be configured for the chlorinator cell that will be used.
Came back and looked at the aqua rite the next morning and it reads 2200.
The average salt level needs to be reset for start up and when a cell is replaced.
Low flow conditions can result in insufficient water in the cell causing inefficient chlorine production.
Spoke to hayward and i ended up replacing the t cell 15.
T 1 5 is the factory default.
How to reset inspect cell light.
How to set turbo cell type to switch cell type cycle main switch from auto super chlorinate auto.
